Shelly
Умный Дом Под Вашим Контролем

Сделайте дом умным и удобным с Shelly.

Shelly — это комплексная система автоматизации умного дома, предназначенная для того, чтобы сделать ваше жилое пространство более удобным, энергосберегающим и безопасным. С широким ассортиментом продуктов, Shelly позволяет управлять освещением, климатом, бытовыми приборами и системами безопасности через интуитивно понятное мобильное приложение или голосовые команды. Хотите ли вы автоматизировать повседневные дела, настроить индивидуальные сценарии или удаленно контролировать свой дом, устройства Shelly предлагают бесшовную интеграцию и простую установку. Совместимая с различными экосистемами умного дома, Shelly обеспечивает надежное и гибкое решение для современной домашней автоматизации.

Shelly Qubino Wave i4 is designed to control and automate

---

Shelly Qubino Wave i4 is designed to control and automate

---

Код	S3800235269077
Код производителя	3800235269077
Наличие	6 шт.
Предполагаемый срок отправки	1-2 рабочих дней

- 10%

13.99 € 15.55

17.07 € с налогом

в избранное

В корзину

---

Вы можете оплатить покупку банковским переводом, банковской ссылкой или кредитными картами VISA и Mastercard..

По счету

20000+ Успешных доставок по всему миру 

Стоимость доставки со склада в Таллинне

Страна доставки

Австралия

Австрия

Албания

Ангола

Аргентина

Бангладеш

Бахрейн

Бельгия

Болгария

Боливия

Босния и Герцеговина

Ботсвана

Бразилия

Великобритания

Венгрия

Венесуэла

Вьетнам

Габон

Гаити

Гана

Гваделупа

Германия

Гибралтар

Гонконг

Греция

Дания

Египет

Замбия

Зимбабве

Израиль

Индия

Индонезия

Иордания

Ирландия

Исландия

Испания

Италия

Йемен

Канада

Катар

Кения

Кипр

Колумбия

Корея (Республика)

Коста-Рика

Кот-д’Ивуар

Кувейт

Латвия

Литва

Лихтенштейн

Люксембург

Маврикий

Мавритания

Мадагаскар

Македония

Малайзия

Мальдивы

Мальта

Марокко

Мексика

Монако

Нигерия

Нидерланды

Новая Зеландия

Новая Каледония

Норвегия

Объединенные Арабские Эмираты

Оман

Перу

Польша

Португалия

Румыния

Сан - Марино

Саудовская Аравия

Сейшельские острова

Сербия и Черногория

Сингапур

Словакия

Словения

Соединенные Штаты Америки

Таиланд

Тайвань

Турция

Украина

Фиджи

Филиппины

Финляндия

Франция

Французская Полинезия

Хорватия

Центрально-Африканская Республика

Чешская Республика

Чили

Швейцария

Швеция

Шри Ланка

Эстония

Южная Африка

Ямайка

Япония

UPS Express Saver - 85 € (85 € с налогом)

0% VAT для Европейских компаний или клиентов вне Евросоюза

Система автоматически формирует заказы с  0% VAT при соблюдении условий

Возможность возврата

14 дней на возврат оборудования

Wave i4

Device: Wave i4

EU Part number/Ordering Code: QNSN-0A24XEU
AUS Part number/Ordering Code: QNSN-0A24XAU
US Part number/Ordering Code: QNSN-0A24XUS
Z-Wave Product type ID: 0x0009
Z-Wave Product ID: 0x0081
Z-Wave Manufacturer: Shelly Europe Ltd.
Z-Wave Manufacturer ID: 0x0460

Terminology

• Device - In this document, the term “Device” is used to refer to the Shelly Qubino device that is a subject of this guide.

• Gateway - A Z-Wave® gateway, also referred to as a Z-Wave® controller, Z-Wave® main controller, Z-Wave® primary controller, or Z-Wave® hub, etc., is a device that serves as a central hub for a Z-Wave® smart home network. The term “gateway” is used in this document.

• S button - The Z-Wave® Service button, located on Z-Wave® devices and is used for various functions such as adding (inclusion), removing (exclusion), and resetting the device to its factory default settings. The term "S button" is used in this document.

• Adding/Inclusion - The process of adding Z-Wave device to a Z-Wave network - gateway. The words included, added, etc. are used in this regard.

• Removing/Exclusion - The process of removing Z-Wave device from a Z-Wave network - gateway. The words excluded, removed, etc. are used in this regard.

• Blind - Refers to any kind of window treatment, such as venetian blinds, roller blinds (screens), roller shutters, vertical window blinds, curtains, integral venetian blinds, pleated blinds, awnings, etc. Additionally, Wave Shutter can also control window motors, projector screens, or any type of bi-directional AC motor (Wave Shutter DC control any kind of bi-directional DC motor).

Short description

The Device is a 4-digital inputs module (110-240 V AC) that controls other devices within the Z-Wave network. It enables manual activation or deactivation of scenes through a switch/push-button.

Switch/push-button connected to input terminal SW1

The device supports Central Scene Command Class and when a button is single pressed, double pressed, held and released, it will transmit a scene notification together with scene number (1,2,3 or 4)

NOTE: Switch type is not supported for triggering central scene notifications

Push-button connected to input terminal SW1

If the SW1 is configured as a push-button:
Scene number = 0X01

• Short press: Central scene notification “Key pressed 1 time=0x00” with scene number 0X01 is sent and send command to the associated devices in associated groups 4 (check chapter Z-Wave Association).

• 2x Short press: Central scene notification “Key pressed 2 time=0x00” is sent.

• Press and hold: Central scene notification “Key held down =0x02” is sent and Send command to the associated devices in associated group 5 (check chapter Z-Wave Association).

• Release: Central scene notification “Key released =0x01” is sent and Send command to the associated devices in associated group 5 (check chapter Z-Wave Association).

If the SW1 is configured as a switch:

• Change switch position once: Send the command to the associated devices in associated groups 4 and 5 (check chapter Z-Wave Association).

If the SW1 is configured as a switch-memory:

• Switching to Close switch-memory contact: send command to the associated devices in associated groups 4 and 5 (check chapter Z-Wave Association) according to switch state.

• Switching to Open switch-memory contact: send command to the associated devices in associated groups 4 and 5 (check chapter Z-Wave Association) according to switch state.

Switch/push-button connected to input terminal SW2

If the SW2 is configured as a push-button:
Scene number = 0X02

• Short press: Central scene notification “Key pressed 1 time=0x00” with scene number 0X02 is sent and send command to the associated devices in associated groups 6 (check chapter Z-Wave Association).

• 2x Short press: Central scene notification “Key pressed 2 time=0x00” is sent.

• Press and hold: Central scene notification “Key held down =0x02” is sent and Send command to the associated devices in associated group 7 (check chapter Z-Wave Association).

• Release: Central scene notification “Key released =0x01” is sent and Send command to the associated devices in associated group 7 (check chapter Z-Wave Association).

If the SW2 is configured as a switch:

• Change switch position once: Send the command to the associated devices in associated groups 6 and 7 (check chapter Z-Wave Association).

If the SW2 is configured as a switch-memory:

• Switching to Close switch-memory contact: send command to the associated devices in associated groups 6 and 7 (check chapter Z-Wave Association) according to switch state.

• Switching to Open switch-memory contact: send command to the associated devices in associated groups 6 and 7 (check chapter Z-Wave Association) according to switch state.

Switch/push-button connected to input terminal SW3

If the SW3 is configured as a push-button:
Scene number = 0X03

• Short press: Central scene notification “Key pressed 1 time=0x00” with scene number 0X03 is sent and send command to the associated devices in associated groups 8 (check chapter Z-Wave Association).

• 2x Short press: Central scene notification “Key pressed 2 time=0x00” is sent.

• Press and hold: Central scene notification “Key held down =0x02” is sent and Send command to the associated devices in associated group 9 (check chapter Z-Wave Association).

• Release: Central scene notification “Key released =0x01” is sent and Send command to the associated devices in associated group 9 (check chapter Z-Wave Association).

If the SW3 is configured as a switch:

• Change switch position once: Send the command to the associated devices in associated groups 8 and 9 (check chapter Z-Wave Association).

If the SW3 is configured as a switch-memory:

• Switching to Close switch-memory contact: send command to the associated devices in associated groups 8 and 9 (check chapter Z-Wave Association) according to switch state.

• Switching to Open switch-memory contact: send command to the associated devices in associated groups 8 and 9 (check chapter Z-Wave Association) according to switch state.

Switch/push-button connected to input terminal SW4

If the SW4 is configured as a push-button:
Scene number = 0X04

• Short press: Central scene notification “Key pressed 1 time=0x00” with scene number 0X04 is sent and send command to the associated devices in associated groups 10 (check chapter Z-Wave Association).

• 2x Short press: Central scene notification “Key pressed 2 time=0x00” is sent.

• Press and hold: Central scene notification “Key held down =0x02” is sent and Send command to the associated devices in associated group 11 (check chapter Z-Wave Association).

• Release: Central scene notification “Key released =0x01” is sent and Send command to the associated devices in associated group 11 (check chapter Z-Wave Association).

If the SW4 is configured as a switch:

• Change switch position once: Send the command to the associated devices in associated groups 8 and 9 (check chapter Z-Wave Association).

If the SW4 is configured as a switch-memory:

• Switching to Close switch-memory contact: send command to the associated devices in associated groups 10 and 11 (check chapter Z-Wave Association) according to switch state.

• Switching to Open switch-memory contact: send command to the associated devices in associated groups 10 and 11 (check chapter Z-Wave Association) according to switch state.

Main applications

• Residential

• MDU (Multi Dwelling Units - apartments, condominiums, hotels, etc.)

• Light commercial (small office buildings, small retail/restaurant/gas station, etc.)

• Government/municipal

• University/college

Integrations

Shelly Qubino Wave devices are developed on the world's leading technology for smart homes – Z-Wave.

This means Shelly Qubino Wave works with all certified gateways supporting Z-Wave communication protocol.

To make sure the functions of Shelly Qubino Wave products are supported on your gateway, we are regularly executing compatibility tests of our devices with different Z-Wave gateways. Please refer to the reports available in the 'Compatibility with Gateways' section below for detailed information on compatibility status.

Simplified internal schematics

N/A

Device electrical interfaces

Inputs

• 1 switch/button input on screw terminal

• 2 switch/button inputs on screw terminal

• 3 switch/button inputs on screw terminal

• 4 switch/button inputs on screw terminal

• 3 power supply inputs on screw terminals: N, L

Outputs

N/A

Connectivity

Z-Wave - Unsecure, S0 Security, S2 Unauthenticated Security, S2 Authenticated Security

Safety features

Overheat protection

• switch off its own relay

• sends the Notification Report to the Gateway (Overheat detected)

• the led lights react as specified above (check blinking mode for Overheat detected)

Any of next activities reset this alarm: power cycle, short press on S button, press any switch-push button connected to any SW (SW, SW1, SW2, …) terminal.

NOTE: The Overheat protection is always active and cannot be disabled.
Additional description above under chapter Notification for Overheat detected.

Supported load types

N/A

User interface

S button and operating modes

1. Normal mode

2. Setting in progress mode

3. Setting mode (with S button)

   • Settings mode is required to start desired procedure for example: adding (inclusion), removing (exclusion), factory reset etc. It has a limited time of operation. After the procedure in Setting mode is concluded, the Device goes automatically into Normal mode.

   • Entering to Setting mode:

     • Quickly press and hold the S button on the Device until the LED turns solid blue

     • An additional quick press on the S button means menu change in infinite loop

     • Menu LED status has a timeout of 10s before entering again into Normal state

S button’s functions

• Manually adding the Device to a Z-Wave network

• Manually removing the Device from a Z-Wave network

• Factory Reset the Device

Specifications

Basic wiring diagram

Legend

Z-Wave Important disclaimer

Z-Wave® wireless communication may not always be 100% reliable. This Device should not be used in situations in which life and/or valuables are solely dependent on its functioning. If the Device is not recognised by your gateway or appears incorrectly, you may need to change the Device type manually and ensure that your gateway supports Z-Wave Plus™ multi-level devices.

Troubleshooting

For troubleshooting please visit our support portal: https://support.shelly.cloud/

Compatibility with gateways

The device send Central Scene Notification command, which can be used in automation. Another way of using the device is with the direct association or use the On Off reports of the SW1 - SW4.

Gateway guides

You may find useful guides on gateways in the Z-Wave Shelly Knowledge base.

Compliance

Wave i4 multilingual EU declaration of conformity.pdf

Wave i4 UK PSTI ACT Statement of compliance.pdf

Printed User Guide

Wave_i4_multilang_2023_V3.pdf